You must always drive at a speed that is reasonable and appropriate for the specific driving conditions. This includes factors like traffic, pedestrians, road quality, and weather. Stay within legal speed limits and adjust your speed as needed for safety.

New Jersey license applicants must show proof of age, identity, legal presence, address, and either a Social Security number or an exemption letter.

This sign warns that the overpass ahead has a low clearance. Do not proceed if your vehicle is taller than the height indicated (in this case, 13 feet, 6 inches).

Regulatory signs, typically white and rectangular with black markings, communicate mandatory rules for drivers. They may display speed limits, prohibitions on passing or turning, and other important regulations.

If you miss a turn or exit, never reverse. Continue to the next safe turn or exit to change direction.

Warning signs, typically yellow and black, alert drivers to impending road conditions or hazards. This sign signals that a lane is ending and that drivers should prepare to merge safely.

If your vehicle’s right wheels leave the road, stay calm. Take your foot off the gas, steer parallel to the road, and slowly guide the car back onto the pavement while checking for oncoming traffic.

If you and another vehicle arrive at an open intersection at the same time, yield to the vehicle on your right. You may proceed when it is safe to do so.

Special child seats are necessary for young children who cannot safely use standard seat belts. Never allow a child to travel in a vehicle without being securely fastened in an appropriate seat.

When stopping on the road at night, turn on your emergency flashers and leave your low beams on to make your vehicle more visible to other drivers.

This sign indicates that the road ahead will turn sharply to the right and then to the left.

Warning signs are typically diamond-shaped with black symbols on a yellow background to warn of hazards. This sign signals wet road conditions ahead, meaning the pavement may be slippery and reduce vehicle control.

Always exercise caution when overtaking a bicycle since the cyclist may need to swerve into traffic to avoid obstacles. Be particularly mindful when driving near cyclists.

Always signal your intentions when changing lanes or turning, and do so at least 100 feet before making the move. If pulling away from the curb, make sure to signal so other drivers are informed of your actions.

A “No stopping” sign indicates that stopping is only allowed if necessary to obey a traffic signal, a police officer, or to avoid a conflict with another vehicle.

Increase your following distance on slippery roads since it may take longer to stop than under normal conditions.

A green light means you can move through the intersection, but you must still yield to pedestrians or vehicles already crossing.

Warning signs, typically yellow with black markings, alert drivers to possible hazards on the road ahead. This sign advises caution when driving under conditions that may make the roadway wet and slippery.

If someone is tailgating you, move to the right if you can. If not, gradually slow down when it’s safe to encourage them to pass. Never slam on your brakes.

Warning signs, usually diamond-shaped and yellow, warn of potential hazards. Orange warning signs are used in construction zones.

Broken white lines separate lanes of traffic moving in the same direction. It’s permissible to cross these lines to pass another vehicle if it’s safe to do so.

Pennant-shaped signs usually indicate no-passing zones. The sign will also have text to confirm that passing is prohibited in that area.

Drivers under 21 with a probationary license must display two reflective GDL decals on their license plates. These decals help identify young drivers.

This sign warns that the divided highway ends ahead.

To prevent accidents due to driver mistakes, apply the crash-prevention formula: stay alert, be prepared for situations, and take timely action when needed.

When you want to change lanes, use your mirrors and check blind spots by looking over your shoulder toward the lane you’re entering. Don’t forget to signal.

In many collisions involving motorcycles, bicycles, or pedestrians, drivers have reported seeing but failing to avoid them. These road users are often harder to spot due to their smaller size, speed, and less noticeable lighting. Always stay alert for them.

When approaching a school bus with its stop signal extended, you must stop completely. You cannot proceed until the bus has retracted its stop arm.

If you’re feeling angry, upset, or emotionally distracted, take time to calm down before getting behind the wheel. Driving while emotionally agitated is dangerous and poor judgment.

Hydroplaning occurs when a layer of water builds up between your tires and the road, causing your vehicle to lose traction. Poor tire conditions, such as low pressure or worn tread, can increase the likelihood of hydroplaning, as can speeding.

Avoid driving on private or public property to skip traffic lights or signs unless directed by an officer—it’s a traffic violation.

This sign indicates that the road ahead winds with a series of turns or curves.

Regulatory signs indicate rules that must be followed. For example, a sign prohibiting right turns means you are not allowed to turn in that direction.

A regulatory sign with a red circle and a red slash through it indicates that a certain action is prohibited, such as making a U-turn at the specified location.

Avoid making last-minute turns. If you reach an intersection and are not in the correct lane to turn, continue to the next intersection and make your turn from the correct lane.

Regulation signs control traffic speed and movement, displaying rules that must be obeyed. This sign tells drivers which direction to follow when turning onto a one-way street.

Many over-the-counter drugs, even those for common ailments like colds or allergies, can impair your ability to drive. Always read the label for warnings, and consult your doctor or pharmacist if unsure.

When a school bus is flashing red lights, stop at least 25 feet away—unless it’s across a dual highway, then slow to 10 mph.

Pedestrians should avoid entering streets or crosswalks when vehicles are approaching. Even though pedestrians have the right-of-way in crosswalks, vehicles approaching too quickly may not be able to stop in time.

Maintaining a safe following distance lets you react to problems ahead without the need for an emergency stop, which could cause a rear-end collision.

Driving slower than the flow of traffic can be dangerous. On a two-lane, two-way road, if your slow driving causes traffic to back up, you must pull over to let others pass. Only drive significantly below the speed limit when necessary due to conditions.

If your power steering fails, steering will require more effort. Slow down and carefully pull over to the side of the road in a safe area.

On average, the body processes one alcoholic drink per hour, though several factors influence this rate, such as the amount of alcohol consumed, the speed of consumption, and individual characteristics like body weight and food intake.

When two vehicles reach an uncontrolled intersection at the same time, the vehicle on the right has the right of way. After that vehicle has safely passed, the other driver may proceed.

Always signal your intentions when changing lanes, turning, or pulling away from the curb. Never fall into the bad habit of neglecting to signal.

Warning signs, usually yellow with black markings, help drivers anticipate potential hazards and road conditions. This sign warns drivers of traffic entering from a side road.

After a minor crash, move your vehicle off the road if it’s safe to do so. Never leave the scene without providing your identification and offering assistance.

Blind spots are areas around your vehicle that you cannot see without turning your head. They are typically located at the sides and rear of your vehicle.

As more vehicles fill the roads, road rage incidents become more common. To prevent road rage, always use turn signals, follow speed limits, and give yourself plenty of time to reach your destination.

Always stop at railroad crossings when directed by a flagger, stop signs, or warning devices. It is illegal to drive around lowered railroad gates.